Pengukuran Ergonomi Metode Recommended Weight Limit (RWL) Lifting Index (LI) di PT X
DOI:
https://doi.org/10.31294/imtechno.v3i2.1229Keywords:
ergonomic, RWL, LI, riskAbstract
In the activity of lifting the box containing PCC onto the trolly at the MH DC section – Mr. Jailani. manual handling, the frequency of box mobilization is ± 5 times per hour, from the area where the box is filled to the chute. The weight of the load (PCC filled box) that is lifted is in the range of 12 kg - 16.5 kg, with a vertical lift from the conveyor to the top of the third box arrangement which is about ±50 cm. At the exit of the conveyor, the arrangement of boxes containing PCC is made two levels before being transferred to the trolley.
The results of ergonomic measurements using the RWL and LI methods are as follows:
- The LI value for the Box lift point position level 1 with the origin of 1.42 means it has a moderate risk level (LI 1-<3) and an LI value of 1 means it has a moderate risk level (LI 1-<3)
- The LI value for the Box lift point position level 2 with the origin of 1.02 means it has a moderate risk level (LI 1-<3) and an LI value of 0.94 means it has a low risk level (LI <1)
- There is a decrease in the value of LI by improving the way of lifting weights so that the level of risk experienced by workers is also lower.
References
Ade andika saputra, Wahyudin wahyudin, Billy nugraha, 2020, Analisis manual material handling dalam mengangkat bahan baku dengan menggunakan metode pendekatan biomekanika kerja (ergonomi) di PT. XYZ, Jurnal Sains dan teknologi Vol. 20 No.2, E-ISSN 2615-2827
Dika satria mahardika, Nurul hudaningsih, 2021, Analisis beban kerja fisik pekerja helper dengan metode nordic body map (NBM) dan biomekanika di Pelindo III cabang Badas Kabupaten Sumbawa Besar, Jurnal Industri dan Teknologi Samawa, Vol. 2 Hal. 56-63 E-ISSN: 9772723868007; P-ISSN: 9772775315009
Humala L Napitupulu, Muhammad ainul syahputra, 2019, Analisis manual material handling menggunakan pada pekerja warehause KRA PT. Pamapersada Nusantara menggunakan metode biomekanika, Talenta Publisher Universitas Sumatera Utara, National Conference on Industrial Engineering (NCIE), p-ISSN: 2654-7031, e-ISSN: 2654-704X, DOI: 10-32734/ee.v2i3.773
Lamto widodo, I wayan sukania, Regina angraeni, 2017, Analisis beban kerja dan keluhan subjektif pekerja serta usulan perbaikan pada proses pembuatan batako, Jurnal ilmiah teknik industri, Volume 5 No. 3 179-190
Mochamad nuri affa, Boy isma putra, 2017, Analisis manual material handling pada pekerja borongan di PT. JC dengan metode NBM dan RWL, Prozima, Vol. 1 No. 1, 22-23, E. ISSN. 2541-5115
Muhammad noviandy, 2019. Analisis pengangkatan CPU di WM Game center dengan metode recomended weight limit (RWL) dan Chaffin anderson.
Nurul ilmi, Muqimuddin, Dinda okta dwiyanti, 2021, Analisis beban dan produktivitas kerja pemindahan manual serta semi manual air galon, integrasi jurnal ilmiah teknik industri
Peraturan Menteri Ketenagakerjaan Republik Indonesia No. 05 Tahun 2018 tentang Keselamatan dan Kesehatan Kerja di Lingkungan Kerja.
Ratna ayu ratriwardhani, 2019. Analisa aktivitas pengangkatan dengan metode RWL.
Riski arifin, et. Al, 2021. Analisis sikap kerja operator UMKM pembuatan tempe menggunakan metode RULA dan RWL (Studi kasus di UMKM XYZ)
Yusuf mauluddin, mohammad tegar ramadhan, 2020. Analisis beban angkat dan postur kerja dalam pengangkutan gallon 19 kg di PT. Mediana, jurnal kalibrasi P-ISSN:1412-3614;E-ISSN:2302-7320, Volume 18; No. 01:2020; hal 30-35
Downloads
Published
Issue
Section
License
Copyright (c) 2022 Diah Andianingsari, Abdul Rahman, Bayu Nur Kuncoro
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
